Posts

Showing posts from April, 2011

How to Setup iSCSI on Windows 2008 R2 Server

Image
Configuration: VMware vSphere 4.0, ESX Hosts, EMC AX4-5 Celerra's, 2 HP Proliant DL380G7 Servers for Veeam 5.0.2 Backup and Replication (1 Server for Main Office and 1 for Collocation Datacenter Site), 2 Cisco Switch (Storage Switch) Main/Collocation Site configuration, Qlogic iSCSI HBA Server Card connectivity to SAN's.

Goal: Connect iSCSI HBA Cards to SAN through iSCSI Initiator on Windows 2008 R2 SP1 Servers.

1. Go to the QLogic website (HBA Drivers Website) if it is an OEM choose EMC, NetApp, etc. This tutorial is for a QLogic EMC HBA. (This is tested to work for Dell PowerEdge/HP Proliant Servers)

Driver Download Link

1a. You will also need to download the EMC PowerPath Server Utility for Windows Server x64 (2008 R2). And make sure that you download and install the Navisphere Server Utility (Windows/VMware) - [Just register your server in Navisphere if you have already configured your AX4-5]
2. Install the drivers and you should now see QLogic iSCSI Adapter under Storage Pro…